• PRESSURE 4.0
    PRESSURE 4.0
    The first recovery sandblaster connected to the Internet with a personal maintenance assistant and 6-years full-service warranty.
  • SABIX 28
    SABIX 28
    It is the sandblasting and surface treatment system that returns the materials to their original state without damaging them.
  • WATERBLAST
    WATERBLAST
    A multifunction sandblaster that bases its operating principle on the humidification of the sand before it comes out of the nozzle.
  • ITALJET PLUS
    ITALJET PLUS
    It represents the expression of the absolute quality that has always been sought after by our company.
  • SUBLIMA
    SUBLIMA
    Dry ice sandblaster, it is synonymous with ease of use and maximum cleaning performance, with low compressed air consumption.
  • IMPIANTI
    IMPIANTI
    They solve any need related to the treatment of pieces of all sizes.
Sandblasters types
Bead Blaster Cabinets, Sandblasting machines with cabin
Application fields
Bodywork
Sandblaster - Pressure shot blasting machine

 Italjet PLUS sand blaster uses a "pressure" system to propel the abrasive. The abrasive is propelled by a special gun which is connected to a tank containing aggregate, by an abrasion resistant pipe. Delivery pressure of the tank generates the abrasive push throughout the pipe up to the gun; the abrasive comes out of the gun shaping a continuous, high-power and large-scale jet. (about 4/5 times higher than a corresponding standard vacuum sand blaster).

ulteriori dettagli

Further details

optional e accessori

Options and accessories

schede tecniche

Data sheets and downloads

ulteriori dettagliFurther details

In the rear Italjet Plus sand blaster is provided with a system called cyclone constantly recovering and removing the abrasive used. It is a two-way suction cyclone allowing to work with a wide range of abrasives.
Italjet Plus pressure sand blaster is provided with a filtration system with self-cleaning cartridges. Filtering devices are made of polyester, instead of paper, hence extremely solid. Timed cleaning occurs by a system of automatic blow moulding.

Each detail of Italjet Plus sand blaster is treated with the utmost care: a search for the best components ensures the best working conditions and safety for the operator, both in terms of structure and reliability.
Although concerning an industrial system, Italjet Plus sand blaster dimensions take up the minimum space required.

Thanks to the maximum compactness of the two units, it is always easy to find it a dedicated area in the work environment.

COMPRESSED AIR CONSUMPTION
At 6 bars with a 4mm nozzle, consumption is about 1100 litres/1'. At a lower pressure, consumption proportionately decreases.

 

POWER SUPPLY
three-phase 400 Volts, 50 HZ, with approximately 24 Volt auxiliary circuits. The system is worked out according to the best technique and with components of ensured quality. All cables are identifiable according to instructions provided in wiring diagram. About 1,5 kW total power draw.

 

SPECIAL VERSIONS 
Following the analysis of specific needs, our technical department is able to customise the structure and characteristics of Italjet Plus. We invite you to take a look at the special model for the regeneration of alloy wheels (Process 3R - Rapid Rims Repair) born from the experience and partnership with an important manufacturer of car body paints.

 

The Italjet Plus Cabin is composed of:

  • TREATMENT CABIN

    TREATMENT CABIN

  • THE CYCLONE

    THE CYCLONE

  • wwwww

    PRESSURE TANK

  • DUST REMOVING FILTER

    DUST REMOVING FILTER

  • TREATMENT CABIN

    Made of an appropriate thick and, if necessary, reinforced steel plate to achieve a solid product free from deformation. Painted with baked epoxy: particularly resistant to abrasion.

    Provided with :

    • sandblasting steel-structured gun with tungsten carbonide nozzle (widia) with a 4mm hole.blow gun to dust pieces after treatment.
    • side door to fix the structure carrying objectholder disc.
    • interlocks for safety preventing from sandblasting gun operation when door is open.operating position provided with
      - window with laminated safety glass protected by aluminium barrel reinforcing mesh.
      - abrasion resistant gloves with gauntlets.
      - sandblasting gun pedal 150 W halogen lamp to light work area.
    • front-side control panel on upper cap All electrical devices are on panel 
      - voltage warning signal
      - start push and vacuum arrest buttons
      - ignition switch of cabinet light
      - insufficient suction warning signal
      - timer
    • control panel located on the upper hood, on the front. All the electrical controls are grouped on the panel
      • voltage presence indicator
      • start and stop buttons of the aspirator
      • cabin light switch
      • insufficient suction warning light
      • hour counter
    • compressed air circuit equipped with:
      • three-way valve placed in the power supply. In one position it allows the power supply, in the other position it blocks the power supply, simultaneously unloading all the machine circuits
      • automatic drain filter / dehumidifier
      • Pressure regulator with pressure gauge
    •  suction control tool (vacuum switch)  .  This prevents the activation of the sandblasting gun if there is not a sufficient degree of suction in the cabin. Its intervention is signalled by a light on the electrical control panel.
    • abrasion-resistant rubber sheets on the internal walls of the processing area.
  • CORPO PISTOLA

    THE CYCLONE

    Device provides for constant recovery and dust removing of abrasive. 360-SK model, a two-way suction device, provided with:


    - regulating suction devices.
    -  abrasion resistant rubber internal coating, 6 mm thick in abrasive circulation area.
    - mesh filter to spot possible rough residues.
    - abrasive loading door.


    Cyclone setting allows to work with a wide range of abrasives and to achieve effective dust removing.

     

  • PRESSURE TANK

    Capacity of 24 litres and provided with all valves and controls for functioning, in particular:


    - excess pressure safety valve
    - abrasive flux regulating valve provided with decimal scale sector
    - compressed air flux regulating valve provided with decimal scale sector
    - air abrasive mixer valve
    - rapid depressuration valve. Valve rapidly discharges pressure from tank, immediately arresting sandblasting when the operator releases the pedal.


    When work process stops, abrasive is automatically refilled in tank, which takes approximately 15 seconds.   

  • DUST REMOVING FILTER

    Provided with self-cleaning cartridges and with a cleaning automatic system of filtering areas. F2C-9 filter model provided with 2 filtering cartridges. Total filtering area: 9 m2. Filter is provided with high head vacuum (1.5 HP).

 

The pressure delivery of the tank generates the thrust of the abrasive that comes out developing a continuous jet of great power and flow

optionale e accessoriOptions and accessories

  • ROTATING TABLE

    ROTATING TABLE

  • CART WITH ROTATING TABLE

    CART WITH ROTATING TABLE

  • wwwww

    ROLLER SHELVES

  • ROTATING BASKET ON DOOR

    ROTATING BASKET ON DOOR

  • ROTATING TABLE

    The rotating table is designed to make the handling of heavy or bulky pieces easier. Rotation is manual.

    It is mounted on five watertight bearings, one central and four peripheral, which ensure maximum strength and stability.

    The bearings are suitable for working in an environment with abrasive powders.

  • CORPO PISTOLA

    CART WITH ROTATING TABLE

    • Cart carrying the rotating table.
    • The movements of the cart and the table are manual
    • Rails inside the cabin
    • External structure with rails designed to receive the cart. The structure is equipped with a hopper.

     

    The table is supported by four peripheral bearings and a central support, all in a watertight version suitable for working in a dust environment.

    The cart wheels are also mounted on sealed bearings.

    The external rails can be lowered by means of a lever mechanism to allow the opening and closing of the door.

    In the absence of this mechanism, the rails should be lower than the lower edge of the door and it would therefore be necessary to make some holes to allow their passage. This would cause dust to escape from the cabin during processing.

  • ROLLER SHELVES

    • Roller surface inside the cabin
    • External roller surface
    • External structure with hopper

     

    the rollers are coated with PVC and mounted on watertight ball bearings suitable for working in a dust environment.

    The external roller conveyor can be lowered by means of a lever mechanism to allow the opening and closing of the door.

    In the absence of this mechanism, the roller conveyor should be lower than the lower edge of the door and it would therefore be necessary to make a long opening to allow for the passage of the pieces. This would cause dust to escape from the cabin during processing.

  • ROTATING BASKET ON DOOR

    • Basket holder disc moved by variable speed motor with adjustable speed between 2 and 10 revolutions per minute by means of a knob.
    • Perforated sheet metal basket with 4 mm holes, painted with oven baked epoxy powder. The hooking of the basket on the bearing disk is done manually.
    • Adjustable holder for the sandblasting gun.
    • Safety bar that does not allow the activation of the automatic cycle if the operator puts his/her arms in the gloves.

    Two-phase treatment cycle (sandblasting + blowing) regulated by timers

schede tecnicheData sheets and downloads
  • METHOD
    METHOD
    Our method is our identity, it is based on listening and dialogue with the customer, analysis of the needs and the consequent search for the appropriate and sustainable solution. 
  • ECO-SUSTAINABILITY
    ECO-SUSTAINABILITY
    Respect for the environment, the health and safety of the operator, are the foundations that drive us every day to seek sustainable and low environmental impact solutions.
  • RESEARCH
    RESEARCH
    Our business philosophy is based on research and innovation: principles aimed at improving our systems and identifying the best solution for the customer.